Foard | Foard – Foard Panel
Author: Foard

Award Winning Observatory

The Gemma Observatory is a private observatory in Danbury, NH and has earned a 2016 Design Award from the Boston Society of Architects and the 2017 AIA Small Projects Award. Located in an area with no light pollution it is

Posted in Recent Projects

Foard Panel Install

Here is a time-lapse camera view of our team installing a classic cape cod style home. It was built in 16 days at the end of December and early January 2017. Cold weather didn’t stop this install from being done

Posted in Recent Projects

HERS Score of 1!

This is one of our high performance homes, located in Carrol, NH with a design day temperature of -90 degrees Farenheit and about 8500 HDDs annually. This 3,205 square foot home is heated with an air to air heat pump

Posted in Recent Projects

SIP Studio Install

These are the Finished photos of a local artist studio designed, manufactured, and installed by Foard Panel Inc. Below is an amusing demonstration of how air tight a SIP building is. The air tightness of a SIP buildings is one

Posted in Recent Projects

Foundation Specifications for Pre-Cut Panels

Introduction: As with most pre-cut and pre-assembled building systems, Foard Panel makes basic tolerance assumptions for the foundation. If the foundation is too far from the drawings, panels will need to be re-cut in the field, and, possibly, some will

Posted in Uncategorized

16″ Polyiso SIPs

The Highest R-value Panel we have sold to date shipped recently an R-90 16″ thick Polyisocyanurate SIP roof. Installed along with 12.25″ EPS R-45 walls, these massive roof panels will keep this Timber Frame home in Manistique, MI toasty warm

Posted in Recent Projects

Redbrook YMCA

The Redbrook Massachusetts, YMCA is a recent commercial project. Foard Panel is installing 8.25″ EPS SIPs R-30 as a roof on the steel frame building. The combination of SIPs and steel can give great structural flexibility for longer spans. The

Posted in Recent Projects

Foard Panel History

We recently found some old photographs of Bo Foard’s earliest projects. Bo Foard started as a Panel installer, back in the 1985. In the early 1993 he began manufacturing his own panels, while continuing to install panels. Foard Panel Inc.

Posted in Recent Projects

Air Sealing SIPs

Durability & Energy Savings Air sealing SIPs properly provides huge reductions in energy consumption through reduced air infiltration. This is not the only purpose of air sealing, the other is building durability. Air infiltration and exfiltration carry large volumes of

Posted in Technical Bulletin

Structural SIP Residence

This is a project finished this week (December 22 2014). Foard Panel did the structural design and construction documents for the Walls, Floors, and Concrete. This is an interesting project combining a walk out basement with a green roof, an

Posted in Recent Projects
website security